WORKSHOP EQUIPMENT
BP-2 VICE BEARING PRESS
Easy to use vice or bench mount bearing press suitable for electric motors,
power tools, car and truck alternators, small engines, vehicle parts,
appliances etc. Gives feel when removing bearings from thin housings.
Includes bench mounting bracket. Ideal for mobile workshops. Vice not
included.
ROTACHUCK, ROTOR AND ARMATURE SERVICE TOOLS
AL-RC2 2 Morse Taper 3-16mm jaw opening chuck
AL-RC2-L 2 Morse Taper 5-20mm jaw opening chuck
AL-RC3 3 Morse Taper 3-16mm jaw opening chuck
AL-RC3-L 3 Morse Taper 5-20mm jaw opening chuck
For accurate machining of rotors and armatures. High tolerance precision
built tool with roller bearings, for long term commercial applications.
Easily fits into tail stock of bench lathes. Replaces old brass jaw chucks.
A full range of replacement tip turning tools also available.
Specifications: Centre height 150mm (6). Distance between centres 923mm (36). Tunnel stock taper 3 morse, swing over bed 300mm, swing in gap 470mm, hollow spindle bore 38mm. Nine spindle speed ranges 50-1500rpm, 2 hp motor, 240 volt. Weight 380kg. Includes two steadies, hardened ground V bed, 6 3 jaw chuck with reverse jaws, 8 4 jaw chuck, 10 face plate, back plates, travelling steady, headstock reducing bush, 2 dead centres, chip tray, toolbox, spanners and instruction book.
AL-330S LATHE STAND
Optional as shown. Includes splash guard.
Armature Equipment
AU-733 ARMATURE UNDERCUTTER
Adjustable for commutators from 18 to 120mm diameter by simple slide
adjustment. 240 volt operation. Direct drive, high torque motor. Wide range
of undercutter saws available on request: .015, .020, .025, .030, .035.
Dual power growler with rocker switch, for inducing increased currents in large, high output armatures. 240 volt operation. Suits armatures 50mm - 180mm diameter.
Universal armature growler for short circuits to frame, shorted coils and shorts between commutator segments on armatures. 240V operation. Suits armatures 50mm - 130mm diameter.
Suitable for power tools and wiper motor armatures. 240 volt operation. Suits armatures 19mm - 75mm diameters
240 volt mains power. 110V and 40V AC continuity test indicator lights. Tests automotive alternator and starter components for shorts to frame and circuit continuity. When used with the armature growler, the in-built AC ammeter allows coil current readings to be made when testing armatures and alternator stators. Model AG-238-1 is an optional extra when used with AG-237L, AG-237 or AG-236.
