Model 600 Series 3 Alternator Starter Test Bench. Features a specially designed 2.2Kw fully variable speed Durst motor, 5000-0-5000 RPM. Available in 240v or 415v. Fitted with large easy to read analogue gauges: 10-20-50Volt meter, 50-100-500Amp meter and 6000-0-6000 Tacho meter, multi-groove drive pulley, quick clamping alternator brackets, starter clamp and slide feed screw for easy belt tensioning. Dimensions 790mm D x 840mm W x 1300mm H. Weight 110 Kg.
Model 600 Series 3 Alternator Starter Test Bench: Features a specially designed 3Kw fully variable speed Durst motor, 5000-0-5000 RPM. Available in 240v or 415v. Fitted with large easy to read analogue gauges: 0-18Volt Regulator tester, 3-0-3 Amp Diode tester, 10-20-50Volt meter, 50-100-500Amp meter and 6000-0-6000 Tacho meter, multi-groove drive pulley, quick clamping alternator brackets, starter clamp, switchable load bank and slide feed screw for easy belt tensioning. Dimensions 790mm D x 840mm W x 1420mm H. Weight 120 Kg
1200 Series Alternator Starter Test Bench: Features a specially designed 4Kw variable speed Durst motor, 5000-0-5000 RPM. Fitted with large easy to read analogue gauges: 3-0-3 Amp Diode tester, 10-0-10 Field Amp meter, 0-40Volt Electronic Regulator meter for 6, 12 & 24 volt units, 10-20-50Volt meter, 50-150-500-1500Amp meter and 6000-0-6000 Tacho meter, 500Amp carbon pile, multi-groove drive pulley, quick clamping alternator brackets, top & side loading starter clamps, slide feed screw for easy belt tensioning. Battery isolation switch. Dimensions 900mm D x 1000mm W x 1600mm H. Weight 400 Kg.Power Supply 415v, 3 phase.
1900S Starter Test Bench: Features a specially designed full starter torque and free run system. Fitted with easy to read 3.5 digit digital meters: 0-200 Volts, 0-2000 Amps DC, Forward & Reverse 0-20,000RPM to 0-10,000 RPM Tachometer with simple setting pulley ratio switches. The automatic calculation circuit gives accurate starter motor speed. Torque range 0--> +/-200Nm or 0---> +/- 271 Ft Lbs. Battery Voltage Selector switches 6-36 volts with provision for higher voltages if required. Slide feed screw for easy meshing of pinion gears and quick clamping multi-position starter bracket fitted to robust compound slide. The advanced design of the mounting slide table allows custom mounting brackets to be manufactured to suit special applications including Military & Aviation. Fully safety guarded which requires two hands to operate. Dimensions 950mm D x 1000mm W x 1700mm H. Weight 400 Kg. Power Supply 240v, 1 phase
Model TB-1900A-15 (15Kw) Model TB-1900A-11 (11.0Kw) Model TB-1900A-7.5 (7.5Kw) Designed to test the wide spectrum of units including the high output alternators found on heavy commercial vehicles. 1900A Alternator Test Bench: Features Extra Heavy Duty frame and specially designed full torque, variable speed electronic drive from 7.5Kw. upwards Fitted with easy to read 3.5 digit digital meters: 0-200 Volts, 0-500 Amps DC, Forward & Reverse 0 - 5,000 RPM to 0-10,000RPM Tachometer with simple setting pulley ratio switches. The automatic calculation circuit gives accurate alternator speed. Field Amp 0-20 Amps, AC Ripple Volt meter designed for testing Star Points & super imposing AC voltage in alternator under test situation. 8.4Kw fully switchable load bank. Battery Voltage Selector switches 6-36 volts with provision for higher voltages if required. Multi-groove drive pulleys, quick acting slide feed screw for easy belt tensioning and quick clamping multi-position alternator bracket fitted to machined compound slide. Provision for optional oscilloscope. Dimensions 950mm D x 1000mm W x 1700mm H Weight 550 Kg Power Supply 415v, 3 phase.
TB-700AC-5.5 Air conditioning Test Bench is designed for fast & accurate compressor testing in your workshop. Features include: Our specially designed 5.5Kw full torque, variable speed electronic drive motor is fitted with a Digital Tacho which reads 5000-0-5000 RPM. Safety belt guard. One piece AA + Multi-groove pulley enables the compound slide to easily & accurately tension belts via the feed screw. DC 12 & 24Volt 20Amp power supply with analogue meter for energising clutches. Condenser unit complete with evaporator and fan. Circuit breakers & Isolation Switch with indicator lights. Quick clamping compressor brackets and an angle plate to suit a comprehensive range of side mount compressors.
Options: 7.5Kw Drive available Model TB-700AC-7.5. Custom mounting brackets, gauges etc. Dimensions 790mm D x 840mm W x 1300mm H. Weight 110 Kg. 415Volt 50Hz
TEST BENCH ACCESSORIES
Designed for battery loading up to 500amps - 200amps intermittently. Unit supplied with heavy duty leads and booster clamps. Steel ventilated cabinet. An ideal accessory for loading alternators in your test bench.
Hand held ammeter. Range: 10-0-10 amps. A handy accessory for your 600 series test bench.
TBA-671 STARTER TORQUE ARM TESTER
Clamps onto starter motor pinion. Reads ft/lbs Nm. Suitable for testing
light vehicle starter motors.
