Industrial - UPS - Solar Fully Automatic Battery Chargers

BULK-ABSORPTION-FLOAT CHARGE
Our range of Industrial UPS chargers will cover all your battery charging requirements from 20 Ahr. upwards in 12, 24, 32, 110, 220, 240 volts. High efficiency, compact size, short circuit protected, auto operation, Amp and Volt meter or LED charge indicator depending on models. It’s important to select the correct size charger to suit the battery being charged and to suit the recharge time requirement for UPS Systems, Emergency Lighting Systems and Computer Back Up Systems. We have put together this range of industrial and UPS chargers to comply with the AS/NZS 2293.1 Standards and are suitable for VRLA, AGM, Wet Flooded and Gel batteries etc.

Features:

Each alarm has voltage free change over contacts, Indication Controls, Local alarms, Amp and Volt Meters, Mains lamp, Manual boost initiate switch, Rectifier fuse, DC output Fuse, Low battery alarms, Charger fail, Boost on etc.
Custom chargers can be manufactured to suit specific volt and amp requirements.

 

 

 

DURST INDUSTRIAL UPS CHARGERS
Durst Model	Volts	Amps	Auto Boost	Manual Boost	Alarms	AS 2293.1
BCG-G7E-24/60AFB	24	60	Y	Y	Y	Y
BCG-G7E-28/35AFB	28	35	Y	Y	Y	Y
BCG-G7E-30/18AFB	30	18	Y	Y	Y	Y
BC-PT36-20	36	20	Y		Y
BC-PT48-16	48	16	Y		Y
BCG-G7E-48/35AFB	48	35	Y	Y	Y	Y
BCG-G7-108/10AFB	108	10	Y	Y	Y	Y
Custom Made	Y	Y	Y	Y	Y	Y

	HOME
Copyright  2003-09, Durst Motor and Electric Industries Pty Limited Phone: intl+ 61 2 9660 1755  Email: sales@Durst.com.au
Images are not to any scale.  Specifications are subject to change without notice. Any errors, inaccuracies or misdescriptions must be accepted.