Battery Testers

BT-3006 HEAVY DUTY BATTERY LOAD TESTER - 1000 AMPS (12.0Kw)

Designed to test Heavy Duty 6,12 and 24 volt batteries from passenger vehicles all the way up to trucks, tractors, earth moving, mining, aircraft, marine including deep cycle and other equipment. Provides the correct load for high rate discharge, cold cranking and amp/hour testing. Dual fan cooling for volume or production use. Accurate load current control incorporating heavy duty carbon pile load rheostat. New flexible cables with spiral cable protectors, insulated current clamps and built-in volt trace wire for highest accuracy. Separate analogue Volt and Amp meters for easy operation. Volts 0-8, 0-16, 0-32 volts. Amps 0-2000 CCA, 0-1000 amps, 0-300 amp/hour
BT-3006T Same as BT-3006, trolley version
BT-3006D Same as BT-3006, with digital readout
BT-3006M Same as BT-3006, with special modification for Super Heavy Duty use.
BT-3006 Defence Stock Number NSN -6625-66-148-6826

BT-2003F BATTERY LOAD TESTER - 500 amps (6.0kw)

Vented steel case with carry handle and rubber buffers. Separate analogue Volt and Amp meters for easy operation. Accurate load current control incorporating heavy-duty carbon pile load rheostat. Cooling fan for reliable continuous use. Includes new flexible heavy duty cable with built-in volt trace wire for high accuracy. Insulated current clamps for maximum safety and protection. Spiral cable protectors. Volts 0-8, 0-16 volts Amps 0-1000 CCA, 0-500 amps, 0-150 amp/hour
BT-2003 Same as BT-2003F without internal cooling fan
BT-2003T Same as BT-2003F built into an ergonomically designed trolley with shelf to fit BC-430 Battery Charger
BT-2003FD With fan cooling and digital readout

BT-570F BATTERY LOAD TESTER - 500 amps (6.0kw)

Single meter with rocker switch between volts and amps makes this unit a compact, powerful tester. High rate accurate discharge through heavy duty carbon pile load rheostat. Suitable for 6 and 12 volt batteries. New heavy duty cables with an in-built trace wire for high accuracy. Spiral cable protectors, fully insulated covered booster clamps for maximum safety and protection. vented steel cabinet, carry handle. Internal cooling fan. Volts 0-16 volts Amps 0-1000 CCA, 0-500 amps, 0-150 amp/hour
BT-570 Same as BT-570F without cooling fan

BT-673 FIXED LOAD BATTERY TESTER

6 and 12 volt, 200 CCA fixed load battery tester with internal cooling fan. Easy to read meter scale complete with operating instructions on front panel. Acid resistant steel case with carry handle and rubber buffers. Includes test leads with insulated clamps.

BT-675 PRODUCTION BATTERY TESTER

6 and 12 volt, 360 CCA push button production battery tester. Acid resistant steel case with carry handle and rubber buffers. Includes test leads with insulated clamps. Fan cooled.

BT-50113 “THE TOASTER” BATTERY TESTER

Suitable for the handyman / DIY person 12 volt fixed load battery load tester.

Electrical Battery Testers

ET-20004T PORTABLE ELECTRICAL DIAGNOSTIC TESTER

A fully portable test station with digital amp and volt meters, fan cooled, Heavy Duty Carbon Pile Rheostat for complete electrical system loading and battery testing. Tests alternator and starter motor output 0-1000 amps current draw. Carbon pile load 500Amps (1000CCA). When used in conjunction with MMCA-1000 inductive current clamp, unit will read as low as 1A up to 1000A for full current leakage and small current draw systems. Other features include large 3.5 digit LCD displays and automatic polarity indication. New flexible cables with spiral cable protectors insulated current clamps and built-in volt trace wire for high accuracy.
ET-20004 Carry version same specification as ET-20004T.

ET-20004LT PORTABLE ELECTRICAL DIAGNOSTIC TESTER

A fully portable test station with digital amp and volt meters, fan cooled, heavy duty carbon pile rheostat for complete electrical system loading and battery testing. Tests alternator and starter motor output 0-1000 amps current draw. Carbon pile load 1000Amps (2000CCA). When used in conjunction with MMCA-1000 inductive current clamp, unit will read as low as 1A up to 1000A for full current leakage and small current draw systems. Other features include large 3.5 digit LCD displays and automatic polarity indication. New flexible cables with spiral cable protectors insulated current clamps and built-in volt trace wire for high accuracy.
ET-20004L Carry version same specification as ET-20004LT.

ET-20004 ACCESSORIES

MM-CA60 60Amp current clamp 10ma to 60 Amps
MM-CA2000 2000Amp current clamp 1Amp to 2000 Amps

Load Banks

LB 24/256

Mobile switchable load bank on trolley assembly with easy to read digital amp and volt meters up to 256Amp at 24Volts and 256Amps at 12Volts. Ideal mobile test unit for testing 12V and 24V UPS, Solar Power systems and other large battery banks. Multi switching positions to allow total flexibility from 1Amp to 256Amps in 1A increments. Fan cooled to give 100% duty and high reliability. Custom voltages and currents available on request. Also suitable for other applications.

LB 24/128

Mobile switchable load bank in bench mount cabinet with easy to read digital amp and volt meters up to 128Amp at 24Volts and 128Amps at 12Volts. Ideal mobile test unit for testing 12V and 24V UPS, Solar Power systems and other large battery banks. Multi switching positions to allow total flexibility from 1Amp to 128Amps in 1A increments. Fan cooled to give 100% duty and high reliability. Custom voltages and currents available on request. Also suitable for other applications.

LB 24/48

Mobile switchable load bank with easy to read analogue amp and volt meters up to 48Amp at 24Volts. Ideal mobile test unit for testing 24V UPS, Solar Power systems and other large battery banks. Multi switching positions to allow total flexibility from 6Amps to 48Amps in 6A increments. Fan cooled to give 100% duty and high reliability. Custom voltages and currents available on request. Also suitable for other applications.

LB 70

Mobile switchable load bank with easy to read analogue amp meter up to 70Amp at 12Volts. Ideal mobile test unit for testing 12V UPS, Solar Power systems, Durst test benches and other large battery banks. Multi switching positions to allow total flexibility from 5Amps to 70Amps in 5A increments. Fan cooled to give 100% duty and high reliability. Custom voltages and currents available on request. Also suitable for other applications.

HOME

Images are not to any scale.
Specifications are subject to change without notice.
Any errors, inaccuracies or misdescriptions must be accepted.

LB 24/256 Mobile switchable load bank on trolley assembly with easy to read digital amp and volt meters up to 256Amp at 24Volts and 256Amps at 12Volts. Ideal mobile test unit for testing 12V and 24V UPS, Solar Power systems and other large battery banks. Multi switching positions to allow total flexibility from 1Amp to 256Amps in 1A increments. Fan cooled to give 100% duty and high reliability. Custom voltages and currents available on request. Also suitable for other applications.
LB 24/128 Mobile switchable load bank in bench mount cabinet with easy to read digital amp and volt meters up to 128Amp at 24Volts and 128Amps at 12Volts. Ideal mobile test unit for testing 12V and 24V UPS, Solar Power systems and other large battery banks. Multi switching positions to allow total flexibility from 1Amp to 128Amps in 1A increments. Fan cooled to give 100% duty and high reliability. Custom voltages and currents available on request. Also suitable for other applications.
LB 24/48 Mobile switchable load bank with easy to read analogue amp and volt meters up to 48Amp at 24Volts. Ideal mobile test unit for testing 24V UPS, Solar Power systems and other large battery banks. Multi switching positions to allow total flexibility from 6Amps to 48Amps in 6A increments. Fan cooled to give 100% duty and high reliability. Custom voltages and currents available on request. Also suitable for other applications.
LB 70 Mobile switchable load bank with easy to read analogue amp meter up to 70Amp at 12Volts. Ideal mobile test unit for testing 12V UPS, Solar Power systems, Durst test benches and other large battery banks. Multi switching positions to allow total flexibility from 5Amps to 70Amps in 5A increments. Fan cooled to give 100% duty and high reliability. Custom voltages and currents available on request. Also suitable for other applications.