Automotive Oscilloscopes

OSC-SAS6000 SCOPE METER

A hand held dual channel automotive oscilloscope designed specifically for diagnostic trouble shooting. A dual channel portable digital scope with large 130mm LCD backlit screen. All functions controlled by soft buttons located around the perimeter of the screen. Reference waveforms and instructions are contained in a plug-in card that can set up the scope for each specific measurement. Simple operation, requires no expert user skills. The most useful lab scope a diagnostic automotive technician could use. RS-232 interface cable connection. Complete with carry case, memory card, pick-ups, charger and operating instructions.
 
OSC-740A SCOPE METER

An economical hand held automotive oscilloscope designed specifically for diagnostic troubleshooting. A dual channel portable digital scope with large 90mm LCD backlit screen. All functions controlled by soft buttons located below the perimeter of the screen. Simple operation, requires no expert user skills. The most useful compact lab scope a diagnostic automotive technician could use. Optically isolated RS-232 interface cable connection. Complete with carry case, pick-ups, charger and operating instructions.
 

AMPS, VOLTS, RESISTANCE Meters

AVR-2001

Complete automotive circuit tester housed in a steel case. Tests battery alternator/generator, regulator, starter and other vehicle electrical circuits. Reverse current scales allow measurement of discharge currents. The easy to read analogue meters have the following ranges:
Amps 2-0-10, 10-0-50, 20-0-100, 100-0-500 (internal shunt)
Voltage 0-10, 0-20, 0-50. Push button 1 volt range
Ohms 0-1,000, 0-10,000, 0-100,000.
Internal 1.5V battery. Supplied with test leads and 500 amp cables.
AM-664 AMP METER

Five ranges allow current flow in any automotive circuit to be measured. Alternator output and starter current to 500 amps can be measured with a built-in 500Amp current shunt. Current to 1000 amps can be measured with the optional internal shunt. Reverse current scales allow measurement of discharge currents.
Amps 2-0-10, 10-0-50, 20-0-100,100-0-500 and external shunt.
 

VM-665 VOLT-OHM METER

This meter has four voltage and three resistance ranges for checking voltage and resistance in any automotive circuit. The one volt range is used for accurate measurement of circuit voltage drop.
Voltage 0-10, 0-20, 0-50. Push button 1 volt range
Ohms 0-1000, 0-10,000, 0-100,000. Internal 1.5v battery
 

VM-662 VOLT METER

Three separate voltage ranges: 0-10, 0-20, 0-50
With banana plugs and test leads. Sturdy steel case. Large, easy to read analogue scales. Ideal for educational training and industry.
 

AM-663 AMP METER


Three easy to read amp ranges: 10-0-50, 20-0-100, 100-0-500. Internally shunted to 100 amps. Heavy duty terminals and test leads included. AM-663S SHUNT External 500 amp shunt option.
 

COMPACT AMP / VOLT METERS

Lap top design with steel cabinet, dual easy to read meters. large carry handle, rubber buffers, complete with full set of test leads.
AVR-567 0-100 amps internal shunt, 0-50 volts
AVR-568 0-100 amps internal shunt, 0-500 amps external shunt option, 0-50 volts
AVR-569 0-100 amps internal shunt, 0-50 volts 1 volt scale and resistance 0-100,000 ohms 0-500 amps external shunt option
 
AVR-562 DIGITAL VOLT METER

Steel case with large carry handle and rubber buffers.
Probes and alligator clips included. Rotary switching: off-200V-20V-2V

 

AVR-563 DIGITAL AMMETER

Steel case with large carry handle and rubber buffers. Internal shunt. Heavy duty terminals. Test leads with insulated current clamps included. Rotary switching: off-150A-20A-off.
 
AVR-564 DIGITAL AMMETER

Steel case with large carry handle and rubber buffers. Convenient 600 amp inductive clamp, low battery indicator. Over-range protected. Rotary switching: off-high-low-off. Inductive clamp included.
 
AVR-565 DIGITAL SHUNT VOLT / AMMETER

Steel case with large carry handle and rubber buffers. Dual LCD displays. Internal amp shunt. Heavy duty terminals and over-range protected. Voltage probes with alligator clips and current test leads with insulated clamps included. Volts: Rotary switching; off-200-20-2 volts Amps: Rotary switching; off-150-20-off amps
 
AVR-566 DIGITAL INDUCTIVE VOLT / AMMETER

Steel case with large carry handle and rubber buffers. Dual LCD displays. Convenient 600 amp inductive clamp. 2000 amp inductive clamp optional. Over-range protected. Voltage probes with alligator clips and inductive clamp with flashing warning light included. Volts: Rotary switching; off-200-20-2 volts
Amps: Rotary switching; off-high-low-off. DC.
 

 


HOME

Copyright  2003-09, Durst Motor and Electric Industries Pty Limited
Phone: intl+ 61 2 9660 1755  Email: sales@Durst.com.au   

 

Images are not to any scale. 
Specifications are subject to change without notice.
Any errors, inaccuracies or misdescriptions must be accepted.

 

Web Design

 

web design sydney by WebStart Design